Support » Fly12 (non-CE)Contact support

Mounting your Fly12

The Fly12 (non-CE) is an unsupported Fly device, check out our latest Fly devices.

Please follow all the steps to ensure your camera doesn’t separate from your bike during use.

Step 1: Installing the safety tether

  • With your unit flat, insert the tether into the hole near the mounting fins (use a pin to pull it out of the small hole)
  • Insert the tether to create a lock then tighten

Step 2: Mounting the camera to your bike

  • Install the handlebar mount
    • Attach the universal mount at the desired location
    • Fasten the mount using the 2 fixing screws

  • Mount your Fly12 on your handlebars
    • Slide your Fly12 mounting bracket into the adjoining mount
    • Fasten the Fly12 Quick Bolt

Ready for your first ride? Check out Using Your Fly12

Please follow all the steps to ensure your camera doesn’t separate from your bike during use.

Step 1: Installing the safety tether

  • With your unit flat, insert the tether into the hole near the mounting fins (use a pin to pull it out of the small hole)
  • Insert the tether to create a lock then tighten

Step 2: Mounting the camera to your bike

  • Install the handlebar mount
    • Attach the universal mount at the desired location
    • Fasten the mount using the 2 fixing screws

  • Mount your Fly12 on your handlebars
    • Slide your Fly12 mounting bracket into the adjoining mount
    • Fasten the Fly12 Quick Bolt

Ready for your first ride? Check out Using Your Fly12

Can't find what you're looking for?

Create a support ticket

Submit a ticket